Aura
Luxpro Parkett Elit
- Glossy
- Polyurethane
- Water-based
- Hard and elastic
- Abrasion-resistant
Download data sheet Properties Glossy polyurethane water-based parquet varnish. - Emphasizes the structure of the wood. - Excellently protects the surface from damage, dirt (domestic pollutants) and moisture penetration. - Withstands intense mechanical stress from abrasion. - Resistant to most household chemicals. - Forms a strong and elastic transparent colorless film. - Does not change the color of the wood. - Does not turn yellow. - Has no unpleasant odor. - Spreads well on the surface, dries quickly. - Has good adhesion to different types of wood. - The VOC content (volatile organic compounds) complies with European Union Directive 2004/42/EC. - Withstands repeated wet cleaning using neutral, non-abrasive detergents. - Do not use hard brushes and sponges, as well as organic solvents for cleaning. - When installing furniture, use special pads for the legs. Maximum permissible VOC content for the product (subgroup e) 130 g/L (2010). Max. VOC content in the product max 130 g/L. - Hardness: 100 (Koenig method, 7 days, DSTU ISO 1522:2015). - Abrasion resistance: < 15 mg (Taber Abraser/ cs-10/ 1000 cycles/ 1000 grams). - Wet abrasion resistance: class 1 (DSTU EN 13300:2024). Purpose Decorative and protective polyurethane semi-matt water-based varnish for parquet. For new or previously painted surfaces. For interior work in residential and public areas with normal and high humidity. For "floating" floors and heated floors. The varnish is not intended for a bathhouse (sauna). Types of surfaces for application For wooden parquet: firmly glued mosaic, artificial, end, sheet (laminated). For wooden floors, wooden steps and railings. The varnish can be used for all wooden interior elements (tabletops, furniture, windows, doors, etc.), as well as wood materials (fiberboard, chipboard, MDF, OSB, cork, etc.).
Surface preparation
Surface: dry, solid, clean, degreased, dust-free. Wood moisture content less than 12%.
New surface (or previously varnished surface with varnish removed):
For maximum adhesion and strength of the varnish film, treat new wood or wood that is completely free of old coatings (varnish, paint, wax, oil, polish, silicone, parquet care products, etc.). Completely remove (cycle) the layer of wood soaked in oil to the depth of oil penetration. Degrease the treated surfaces of tropical wood, hardwood (oak, beech) and resinous sticky wood. Lightly moisten rough wood with water and, after drying, remove the raised pile by sanding. The first sanding of the wood should be done with coarse sandpaper. When sanding, smooth the surface as much as possible. Finish sanding before priming (or before applying tinting material) should be done with fine sandpaper (240), remove dust. Prime the prepared surface with one layer of primer. For priming, use PARKETT ELIT varnish, diluted with water by 10-15% with a consumption of 10-15 m2/l. For priming, you can use a pore filler (acrylic or nitrocellulose) for wood. Priming tool: varnish roller (or brush). After priming (after 4 hours), sand the dried surface with fine sandpaper (240), removing the raised pile. Remove dust. Before applying varnish, check the compatibility with the surface of the wood being treated on a small area. Some exotic and hard wood species may change color dramatically. In all cases, remove dust from the treated surface and surrounding elements with a vacuum cleaner, and then with a clean, damp, lint-free cloth.
Previously varnished surface (without removing the varnish coating):
Clean the surface of old, peeling varnish. Carefully, without applying much effort, sand the entire surface with fine sandpaper (240). Remove dust. Do not prime previously varnished surfaces. Check the compatibility of the varnish with the old varnish coating by performing a test varnishing on a small area.
Application
Stir the varnish before use and stir during use. Apply under conditions of relative humidity of 40-70%, air, base and varnish temperature from +15ºС to +25ºС with a varnish roller or varnish spatula. On small areas, a brush can be used. Application with a roller (brush): 2-3 layers. Application with a spatula: 4-5 layers. Apply the varnish in the direction of the light in the room or along the wood fibers from edge to edge of the surface. Before applying the last layer of varnish, sand the surface with sandpaper (240), remove dust. Attention! Do not apply the varnish in thick layers with excessive material consumption. Applying the varnish in conditions of direct sunlight, drafts, dustiness of the room, increased (or decreased) temperature and humidity can lead to coating defects.
Care of the varnished surface
It is recommended to clean the varnished surface with a sponge or soft cloth using a warm detergent solution. Freshly painted surfaces should be handled with care, because under normal conditions the coating reaches its final hardness only after 14 days. If it is necessary to clean the surface before this period, light cleaning with a soft damp cloth is recommended, avoiding rubbing.
Working tools
Varnish roller, varnish spatula, brush.
Cleaning of tools
Rinse with water immediately after use. Dried varnish can be cleaned mechanically.
Polyurethane dispersion, water, additives. UA VOC limit value for this product (Cat. A/e): 130 g/l (g/l). This product contains max 130 g/l (g/l) VOC.
Product information is based on laboratory research results and practical use. The manufacturer cannot be held responsible for damage caused by failure to follow the instructions for use or violation of storage terms and conditions.
Safety equipment
During work, follow general occupational hygiene rules. Work in a ventilated area, wear work clothes, gloves. Keep out of reach of children. In case of contact with skin or eyes, rinse with water. The varnish is fire and explosion-proof.
Disposal
The remains of dried varnish should be disposed of as household waste, polymer containers should be collected for recycling or disposed of as household waste.
0.75 l (0.77 kg); 3 l (3.09 kg); 5 l (5.15 kg)