Download data sheet Properties Acrylic decorative enamel. - Forms a durable semi-matte coating with excellent decorative characteristics. - Has good wear resistance and elasticity. - Does not crack or turn yellow, withstands temperature and humidity changes. - Resistant to repeated washing and cleaning with non-abrasive detergents. - Has no residual stickiness. - Dries quickly. - Has good adhesion to various types of surfaces, including old alkyd ones. - Tinting in pastel (base A), as well as in bright and saturated colors (base TR) according to the Eskarocolor system. - The coating acquires its final resistance to washing after 4 weeks. - Has no unpleasant odor. Classification according to the standard DSTU EN 13300:2024 - Decoration. - Type of binder: acrylic resin. - Semi-matte. Fine-grained. - Resistance to wet abrasion: class 1. - Surface coverage rate with material: 6-10 m²/l per single coat. Intended use For decorative and protective painting of wooden and mineral, as well as primed metal surfaces. Used only in tinted form. Not suitable for painting floors. Types of surfaces for application Inside dry and damp rooms: New or previously painted (with water-dispersion, alkyd, oil-phthalate paints) surfaces: wooden (window frames, doors, skirting boards, decorative elements, etc.), mineral (putty, plaster, concrete bases, etc.), plasterboard. Primed or previously painted (with water-based enamels, alkyd and oil-phthalate paints) metal surfaces. Well suited for painting window slopes, as well as primed or previously painted radiators and heating system elements. Exterior: Wooden, mineral, primed metal surfaces.
Base A - pastel colors
TR base - rich tones
- Wear resistance class 1 according to DIN EN 13300.
- The VOC (volatile organic compounds) content complies with European Union Directive 2004/42/EC.
- when applied with a brush (roller): 6–10 m²/l,
- by spray: up to 20 m²/l.
To achieve maximum strength and coverage of the enamel film, the total consumption of Remix Aqua 30 should be 3-5 m²/l. (excluding the primer layer for TR base enamel. The consumption of enamel depends on the type and preparation of the surface, the color of the base, and the color of the enamel.
Surface preparation
The surface must be free of flaking paint, dirt and dust, rust, degreased, dry. Prime metal surfaces with a suitable primer. Surfaces previously painted with oil or alkyd paint, as well as shiny surfaces, should be sanded to a matte finish. If necessary, fill and prime uneven surfaces with suitable materials. Prime new wood with a suitable primer and sand with sandpaper. Prime mineral surfaces and gypsum plasterboard with a suitable primer.
Application
Stir the enamel before use. Apply with a brush, roller in 2-3 layers, with a sprayer (including airless method) in 3-4 layers. For spray application, dilute the paint with water to working viscosity. Work should be carried out at a temperature of the enamel, ambient air and base from +10 ºС to +25 ºС and a relative humidity of ≤80%. The second (next) layer of enamel should be applied no earlier than 5 hours after applying the previous one. Do not apply enamel in direct sunlight, during fog, or wind. Features of applying the TR base: Remix Aqua 30 base TR enamel (colorless) should be used only in a tinted form (according to the Eskarocolor system). To increase the coverage and reduce enamel consumption, it is recommended that before applying Remix Aqua 30 base TR enamel, the surface be painted in 1 layer with Remix Aqua 30 base A enamel (white), which is tinted in a shade lighter than the color of the finishing coating.
Attention! The coating gains its final strength 4 weeks after applying the enamel. The coating acquires its final color after the enamel dries.
Working tools
Brush, roller, spray gun.
Cleaning of tools
Rinse with water immediately after use. Dried enamel can be cleaned mechanically.
Polymer acrylic dispersion, pigment – titanium dioxide (for base A), wax, special fillers, water, additives. UA VOC limit value for this product (cat. A/a): 30 g/l (g/l). This product contains max 30 g/l (g/l) VOC.
Store and transport in undamaged original, hermetically sealed packaging at temperatures from +5 ºС to +35 ºС. Do not freeze or expose to direct sunlight.
Base A: 0.75 L (0.91 kg), 2.5 L (3.2 kg) Base TR: 0.7 L (0.77 kg), 2.5 L (2.75 kg)