Aura
Fasad Fort
- Elastic and vapor-permeable coating.
- High coverage and adhesion.
- Protection against intense weather conditions.
- For insulated facades.
Properties Weather-resistant, matte acrylic, silicone-modified paint for facades. - Creates an elastic, wet-erasing, vapor-permeable coating. - High water repellency (low water permeability: ≤0.25 kg/(m²*h0.5). - High vapor permeability ((Sd) ≤0.14 m). - Does not interfere with the natural breathing of surfaces. - Has high coverage and adhesion. - Reliably protects the facade from intense atmospheric moisture. - Retains its protective and decorative properties on facades for a long time. - Easy to apply. - Tinted using the Eskarocolor system. CLASSIFICATION ACCORDING TO THE STANDARD DSTU EN 1062-1:2012 DSTU EN 1062-1:2012 | G3 | E2 | S1 | V1 | W2 | A0 | С0. Purpose For painting in facade thermal insulation systems with mineral wool and expanded polystyrene (foam), as well as painting decorative plasters. Can can also be used for interior work for painting ceilings and walls. The paint is not intended for horizontal surfaces exposed to water. Types of surfaces for application Facade thermal insulation systems with mineral wool and expanded polystyrene (foam), decorative plasters. New or previously painted mineral substrates, including concrete, plastered surfaces, cement-fiber boards, silicate bricks. For interior work: to create a matte, wet-scratch-resistant coating on mineral substrates.
Base A - pastel colors
STANDARD DSTU EN 1062-1:2012
The paint consumption depends on the type, preparation, color of the surface, and the color of the paint. For embossed surfaces, the consumption is determined by test application.
Surface preparation before painting
The surface to be painted must be dry and solid.
Unpainted surfaces. Clean the surface of loose and flaking material, dirt and dust. Level out irregularities, cracks and potholes with acrylic putty. To obtain a high-quality and durable coating, as well as to level out the absorbency, it is recommended to pre-prime the base to be painted with a penetrating strengthening water-dispersion primer TM AURA or TM Eskaro. At least 3 weeks must elapse between applying a fresh cement plaster or putty layer and painting. New cement-fiber boards can be painted 6 months after their installation.
Painted surfaces. Clean the surface of loose and flaking paint, dirt and dust. Remove oil, bitumen and other contaminants. If necessary, degrease the surface with a 3–5% solution of baking soda, rinse with water and dry. Smooth out unevenness, cracks and potholes with acrylic putty. When carrying out restoration work, it is necessary to check the compatibility of AURA Fasad Fort paint with the old coating on a small area of the surface.
Application
Mix the paint thoroughly before use.
Apply with a roller, brush or sprayer in two layers. When applying the first layer, the paint can be diluted with water no more than 5% by volume. Apply the second layer without dilution. Work should be carried out at ambient and base temperatures from +5 °C to +30 °C.
It is forbidden to paint facades during rain, fog, strong wind.
For painting large areas with tinted paint, it is recommended to use paint from one production batch. If there are tinted paints from different production batches, it is recommended to mix them in advance in one container.
Attention! The coating acquires its final color after the paint dries. The coating acquires its final resistance to atmospheric and mechanical influences, as well as to washing, in 3–4 weeks.
Working tools
Brush, roller, sprayer.
Cleaning tools
Wash with soap and water immediately after use. Dried paint is cleaned mechanically.
Copolymer acrylic dispersion, silicone emulsion, pigments, fillers, water, additives. UA VOC limit value for this product (cat. A/1): 30 g/l (g/l). This product contains max 30 g/l (g/l) VOC.
Store and transport in undamaged original packaging at temperatures from +5 °C to +35 °C. Do not freeze or expose to direct sunlight.
Base A: 1 L (1.41 kg) - 2.5 L (3.53 kg) - 5 L (7.05 kg) - 10 L (14.1 kg)