Eskaro Mattilda

Fully matt washable interior paint

Velvet effect
Excellent opacity
Highest grade of wash resistance

Download Technical Data Sheet

Description
Specifications
Information
Certificates

Properties
Acrylate water-borne absolutely matt wash-resistant paint.

Covers the surface perfectly.
High decorative properties: provides a velvety absolutely matt coating.
Extra strong smooth surface.
Frequent washing.
Contains wax that increases dirt-repellent and water-repellent properties and helps remove impurities easily.
The coating reaches its peak wash resistance in approximately 4 weeks.
Provides good vapour permeability.
The paint does not give off harmful substances into the air and has been classified as emission class M1
Suitable for sensitive and allergic people

Maximum permissible VOC content for the produc (subcat a): 30 g/L. Maximum VOC content in the product ˂30 g/L

Gloss:

deep matt (approximately 2) in accordance with EN 13300;
deep matt (approximately 2) in accordance with ISO 2813;
group 6 in accordance with RYL 2012.

Wash resistance:

class 1 in accordance with EN 13300 (ISO 11998);
group 314 of painting regulations in accordance with RYL 2012.

Purpose

Painting walls and ceilings in dry rooms with high performance requirements. Especially recommended for rooms with exclusive interior decoration: living rooms, reception and meeting halls, and study rooms, restaurants.
Not suitable for painting floors, doors and furniture.

Types of surfaces for painting

Surfaces previously painted with latex, alkyd or oil paints or new surfaces made of concrete, aerated concrete, gypsum board; brick; surfaces finished with putty or plastered and surfaces covered with glass fibre wallpaper or other rolled finishing materials. For indoor use.

Quality standards

EN 13300 [Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification] – classification standards of coverage, gloss level and wet abrasion resistance parameters for water-borne coating materials for interior walls and ceilings.
ISO 11 998 [Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings], ISO 2813 [Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees] – techniques for measuring gloss and wear resistance parameters.
RYL – construction quality standard for finishing commonly followed in the EU area; describes coating materials, using generally accepted standards, for proper quality assurance in construction.
VOC (volatile organic compounds) – content in accordance with the European Union directive 2004/42/CE.
Product and service quality is guaranteed by the quality, environmental protection, occupational health and safety management system in accordance with standards ISO 9001:2015; ISO 14001:2015 and OHSAS 18001:2007.
The label “Eesti Allergialiit tunnustab” (“Estonian Allergy and Asthma Federation recognizes”) is assigned to products that are safe, reliable, do not contain fragrance or generally irritating or sensitising substances and that help to reduce indoor air pollutant levels and are suitable for people with sensitive skin or suffering from allergic diseases

Ручная колеровка

… Assortment of pastes

Машинная колеровка

База TR saturated colours

…

Surface preparation before painting

Previously unpainted surfaces: Clean the surface, removing dirt and dust. Apply a suitable putty from the FILLER line to even out the surface if necessary. After drying, sand the filled surface to make it even and remove sanding dust. Prime filled, porous or unevenly porous surfaces with Aquastop moisture barrier. Follow the product instructions for use. Prime the surfaces with water-borne priming paint Flat to even out the surface absorption capacity, increase the durability of the painted surface and decrease the consumption of the top coat paint.
Previously painted surfaces: The painted surface must be cleaned from loose and peeling material, grease, dust and other impurities. If mould removal is necessary, use Biotol E or Biotol Spray (follow the product instructions for use). To clean the surfaces that are very dirty or have soot, water, nicotine or grease stains, wash the surface with a 3%–5% solution of baking soda, thoroughly rinse with clean water and leave to dry. Then prime with the isolating paint Objekt. Before painting durable old alkyd surfaces, sand them until they are matt and remove sanding dust thoroughly. Use a putty from the FILLER line to fill cracks, holes and uneven areas. Sand the filled surface to make it even and remove sanding dust. Prime filled surfaces with Aquastop or Tiefgrund moisture barrier to reduce porosity. Prime the surfaces with water-borne priming paint Flat to decrease the consumption of the top coat paint and improve coverage.

Application

Stir the paint thoroughly before application. We recommend mixing tinted paint in one package.
Apply 2 coats with a roller or spray gun at the temperature between 10 °C and 20 °C and relative humidity not exceeding 80%. When using a spray gun, you can dilute the paint with water in the amount of up to 6% of its volume. Apply the finishing coat, using undiluted paint. Avoid application in draughty places and at high air temperature (over +25 °C). When painting, make sure to keep a wet edge. In case the paint job is carried out in adverse conditions (draughts, the use of heating appliances, high temperature or low air humidity), we recommend using the Time+ slow-dry agent in the amount of up to 3% of the paint volume (mix 0.33 L of Time+ into 9.5 L of paint).

Care for the painted surface

In the 4 weeks after application until the paint has reached its peak hardness and wash resistance, threat the surface with care.
We recommend using water and neutral or medium alkaline detergents (pH below 9) for cleaning.
Do not use organic solvents, abrasive cleansers and hard scrubbing brushes or sponges.
Use Biotol E and Biotol Spray to remove mould.
Use soft sponges or cloths for cleaning. Wipe the surface dry after wet cleaning.
If necessary, the surface can be lightly wiped with a soft sponge or cloth approximately 48 hours after paint application.

Tools

Roller (pile length: 10-14 mm), airless spray gun (nozzle: 0.021–0.027'', pressure 120-250 bar).

Tool cleaning

Wash with soap and water after completing work.

Colour	White; ready made color: black
Tinting	Machine tinting according to the Eskarocolor system (bases А, TR).
Consumption	6-10 m²/L.
Drying time	At the temperature of +20 °C and the relative humidity of 50%, the surface is ready for the application of another coat in 1–2 hours. The coating reaches its peak wash resistance in 4 weeks.

Store and transport in intact containers at the temperature between +5°С and +35°С. Protect from exposure to freezing and direct sunlight.

Volume / weight

0,95 L – 2,85 L – 9,5 L

Warranty period of storage	3 years
Frost resistance	None.
Density