Eskaro Cinderella

Highly dirt-repellent matt wall paint

„Easy to clean“ – easy to clean from difficult dirt
Provided with self-crosslinking dispersion.
Contains special solid fillers based on natural aluminosilicate
Highest grade of wash resistance (Class I)

Download Technical Data Sheet

Description
Specifications
Information
Certificates

Properties

Matt acrylate water-borne paint for wet and dry indoor areas

Excellent opacity.
Easy applications without dripping or splatter; easy to level out.
Exceptional decorative properties: provides a smooth dense matt non-porous coating.
Due to the self-crosslinking dispersion, the formed surface is stronger and less porous that prevents the penetration of complicated dirt (coffee, tea, fruit juices, wine, sauces, markers, watercolor paints, pencils, pens, lipstick, etc.)
The exceptional mechanical strength of the coating is ensured by the use of a special natural aluminosilicate solid component.
Highest grade of wash resistance (Class I according to EN13300)
Remove stains and dirt immediately after they appear
Can withstand moderate rubbing without becoming glossy.

Maximum permissible EU VOC content for the product: (subcat a): 30 g/L. Maximum VOC content in the product <10 g/L
Gloss:

matt (approximately 7) in accordance with EN 13300

Wash resistance:

class 1 in accordance with EN 13300

Purpose

Painting walls in humid and wet indoor areas. Especially recommended for nurseries, school classrooms, hotels, kitchens and catering facilities. Do not use the coated surface for drawing! Not suitable for painting floors, doors or furniture.

Types of surfaces for painting

Surfaces previously painted with latex, alkyd or oil-based paints or new surfaces made of concrete, aerated concrete, gypsum board or brick; surfaces finished with putty or plastered and surfaces covered with glass fibre wallpaper or other rolled finishing materials. For interior use.

Quality standards

EN 13300 [Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification] – classification standards of coverage, gloss level and wet abrasion resistance parameters for water-borne coating materials for interior walls and ceilings.

VOC (volatile organic compounds) – content in accordance with the European Union directive 2004/42/CE.

Product and service quality is guaranteed by the quality, environmental protection, occupational health and safety management system in accordance with standards ISO 9001:2015; ISO 14001:2015 and OHSAS 18001:2007.

Surface preparation before painting

The surface to be painted must be carefully cleaned from loose or peeling material, dirt, grease and dust. Sandpaper durable alkyd substrates until they are matt and remove the dust thoroughly. If the surface is very dirty, wash it with a 3–5% solution of soda or a detergent containing ammonia solution, rinse with water and dry. Use a putty from the FILLER line to fill cracks, holes and uneven areas. Sand the filled surface to make it even and remove sanding dust. Prime filled surfaces with Aquastop or Tiefgrund, in wet rooms with Aquastop Bio moisture barrier to reduce porosity. Follow the product instructions for use.

Application

Stir the paint thoroughly before application. Mixing tinted paint in one container is recommended. Apply 2 coats with a roller or spray gun at the temperature between +10 °C and +25 °C and relative air humidity below 80%. When using a spray gun or for the application of the first coat, dilute the paint with water in the amount of 5% until it
reaches working viscosity. Apply undiluted paint for the finishing coat. Avoid application in drafty places and at high air temperature (over +25 °C). When painting, make sure to keep a wet edge.

Care for the painted surface

Under normal circumstances, the coating reaches its initial level of water-repellent (hydrophobic) protection within 1–2 weeks after application, so we do not recommend cleaning the painted surface during this period. In case the painted surface needs to be cleaned earlier, do it cautiously with a soft damp cloth. Remove stains and dirt
immediately after they appear. Under normal circumstances, the coating reaches its peak wash resistance in 3-4 weeks, after which it can also withstand more vigorous cleaning. To clean the painted surface from dirt, use warm water and a soft washcloth or microfiber cloth. Do not use abrasive tools or detergents, stiff brushes or rough sponges. As a rule, the painted surface regains its water-repellent properties in 5–7 days after it is cleaned with a damp cloth, but the timeframe still depends on the detergent or tool used, on how vigorous the cleaning process is and how dirty the surface is. The use of a detergent may prevent the surface from regaining its hydrophobic properties. However, the absence of the paint’s water-repellent properties will not reduce its resistance to washing.

Tools

Roller, airless spray gun (nozzle: 0.017–0.021')'.

Tool cleaning

Wash with soap and water after completing work.

Colour	White
Tinting	Machine tinting according to the Eskarocolor system (bases А,TR).
Consumption	Paint consumption on absorbent substrates is 7–8 m²/L, on non-absorbent substrates 9–10 m²/L
Drying time	At the temperature of +20 °C and the relative humidity of 80%, the surface is ready for the application of another coat in 1…1,5 hours.

Safety precautions

The product is not classified as hazardous according to CLP Regulation (EC) nº 1272/2008. Contains 1,2- benzisothiazol-3(2H)-one. May produce an allergic reaction. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Do not eat or drink during the process, washing hands afterwards with suitable cleaning products. As a preventative measure it is recommended to use basic Personal Protection

Equipment.

Waste treatment Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous

Volume / weight

0,9 L – 2,7 L – 9 L

Warranty period of storage	3 years
Frost resistance	None.
Density
Storage conditions	Store and transport in a tightly sealed container at the temperature between +5…+30 °С. Protect from exposure to freezing and direct sunlight.