Eskaro
Biotol
- Concentrate 1:20
- Effectively destroys mold
- Prevents its reappearance Suitable for disinfection of industrial premises
- For indoor and outdoor use





An effective agent against mold (lichens, mosses, algae).
For the prevention and destruction of mold. It is used in rooms with high humidity: bathrooms, kitchens, laundries, as well as for the treatment of facades and window frames, building plinths, cornices, balconies, etc. For interior and exterior use.
Powers: ✔️ Concentrate 1:20. ✔️ Destroys mold, prevents the appearance of mold. ✔️ Does not contain mercury and other heavy metals. ✔️ Odorless. ✔️ Does not interfere with the natural breathing of surfaces. |
Expenditure: ✔️ 40-80 m2/l concentrate per ball. Density: ✔️ 1.0 kg/l. |
Color: ✔️ Colorless, transparent. |
Composition: ✔️ Quaternary ammonium salts, additives, water. |
Frost resistance: ✔️ Do not freeze during storage. |
Guaranteed shelf life: ✔️ 3 years from the date on the package. |
Disposal: ✔️ The leftover product should be disposed of at a hazardous waste landfill, and the packaging should be taken to a landfill. |
Storage conditions: ✔️ Store and transport in original hermetically sealed containers at temperatures from +5°C to +25°C. Keep away from heaters and direct sunlight. |
Types of surfaces for application: ✔️ Stone, concrete, plastered, brick and other porous surfaces, as well as painted, ceramic and wooden surfaces. |
Surface preparation : ✔️The surface should be dry, thoroughly cleaned from loose, crumbling and peeling material, microorganism spores, dirt and dust. The surfaces, abundantly covered with microflora growths, which prevent the penetration of Biotol to the substrate, should be carefully cleaned with a scraper, brush, etc. before treatment, without using water, taking care not to infect clean, unaffected surface areas. If necessary, sandblasting and pressure washing can be used. |
Application: ✔️Dilute Biotol Concentrate with water 1:20. Apply the solution liberally, until a wet layer is formed, to the surface with a soft brush, sponge or spray at the temperature of the ambient air and the substrate above +5°C. Apply the solution in several passes, one after the other. On vertical surfaces to prevent drips, apply the solution from the bottom up, spreading it well over the surface. On heavily mold infested surfaces, repeat the procedure in 10-15 minutes.During application, avoid getting the product on nearby objects. If there are plants, flowers, garden crops, grass and shrubs nearby, they should be covered with plastic wrap. When working outdoors, avoid rainy or foggy weather. After 1-2 days, thoroughly clean the surface on which there was growth (mold, fungus, etc.) with a scraper, hard brush or sponge. To prevent the re-emergence of biological contamination, the surface should be treated with Biotol again after mechanical cleaning. |
Drying time: ✔️ Further surface treatment (priming and painting) shall be carried out after it has dried, but not earlier than 24 hours under normal conditions. The treated wood must be dried and meet the recommendations for wood moisture content for further processing with paints and varnishes. |
Working tools: ✔️ Brush, sponge, spray. |
Cleaning the tools: ✔️ After finishing work, rinse with soap and water. |
Precautionary measures: ✔️ Observe general occupational health and safety rules during work. Work in a ventilated area, wear work clothes and gloves. Wear eye or face protection. Keep out of reach of children. Irritating to eyes, respiratory tract and skin. In case of contact with eyes and skin, rinse with water, seek medical advice if necessary. Contains biocide. Harmful to the environment and aquatic life. Do not pour into sewage system, water bodies and soil. The product is fire and explosion-proof. |