Aura
Beton Kontakt
- With quartz filler.
- Creates a durable rough surface.
- Provides reliable adhesion when applying heavy plasters and putties, adhesive mixtures, structural materials.
- Used for processing ceramic tile coatings before re-tiling.
- Resistant to atmospheric and mechanical influences.
Download data sheet 
Properties Adhesive primer with quartz sand for non-absorbent surfaces. - Has good adhesion to non-absorbent substrates. - Contains a special set of quartz fillers. - Is distributed beautifully and evenly over the surface. - The uniformity of primer application is additionally determined by the uniformity of the coating color. - Creates a rough surface that ensures reliable adhesion when applying heavy plasters and putties, adhesive mixtures, structural materials, as well as when facing with ceramic tiles. - After drying, it creates a strong and moisture-resistant coating. - Vapor-permeable. - Has no unpleasant odor. Purpose Used for processing dense, glossy, non-absorbent and weakly moisture-absorbing mineral bases to create an intermediate bonding layer before applying plasters (gypsum, gypsum-lime, lime-cement, etc.), structural paints and putties during interior and exterior works. Can be used for processing ceramic tile coatings before re-facing with ceramic tiles. For interior and exterior works. Types of surfaces for painting Monolithic concrete surfaces, ceramic tiles, plasterboard, surfaces painted with oil and alkyd paints and others.
The drying time is affected by the layer thickness, changes in temperature and air humidity.
If the air temperature decreases, the drying time increases.
Surface preparation before painting
The surface must be dry, thoroughly cleaned of loose, flaking surface layer, dust, dirt, grease. Wash heavily soiled and greasy surfaces with a 3–5% soda solution, rinse with water and dry. Treat loose and highly absorbent surface areas with TM Aura strengthening primer. Treat surfaces that are frequently wetted and prone to mold with Biotol mold inhibitor (or Biotol Spray). Treat metal surfaces with an anti-corrosion primer.
Application
Ready to use. Mix. Apply with a roller or brush in one layer at a primer, base, and air temperature of at least +5 °C.
The thicker the layer and the heavier the weight of the finishing material, the greater the primer consumption should be. Finishing materials should be applied after the primer has completely dried.
Working tools
Brush, fur roller.
Cleaning of tools
Rinse with water immediately after use. Dried primer can be cleaned mechanically.
Copolymer acrylic dispersion, pigment, quartz sand, fillers, functional additives, water. UA VOC limit value for this product (cat. A/a): 30 g/l (g/l). This product contains max 30 g/l (g/l) VOC.
1.4 kg - 7 kg - 4 kg - 14 kg