








Properties Ready-to-use silk-matt protective wax. Finishing agent for structural mineral surfaces. For high-quality interior decoration. - VAX MATT - a mixture of special waxes in a water dispersion of acrylic copolymer. - Jelly-like, thixotropic. - Specially selected viscosity ensures convenient application with various tools. - VAX MATT emphasizes the effect of volume and depth of the surface structure. - Forms a finishing silk-matt (gloss approximately 10) durable and elastic coating, resistant to wet cleaning. - Protects the base from water and dirt. - Vapor-permeable. - Tints in light and bright saturated tones. - For interior work. Purpose Finishing of structural mineral bases (decorative plaster, natural and artificial stone), as well as surfaces previously painted with matte water-dispersion paints. Including for finishing decorative plasters with the effects of polished marble ("marmorino", "grotto"), hewn stone ("travertine"), crumbling natural stone and other structural surfaces. For decorating the interiors of residential and office premises with normal humidity: shops, restaurants, offices, etc. Types of surfaces for application Mineral bases (plaster, concrete), gypsum plasterboard, MDF, etc., as well as surfaces previously painted with matte water-dispersion paints.
Surface preparation
The surface must be dry, clean and strong. Decorative mineral bases (plasters, putties, etc.) must be allowed to dry completely according to the manufacturer's recommendations. Remove any contamination that may reduce the adhesion of VAX MATT to the base. Porous and dusty surfaces must be treated with a penetrating primer. To obtain a uniform structure and rich color of the base, it is recommended to level the surface absorbency with a primer before applying VAX MATT. As a primer, use a matte water-dispersion paint of class 1-2 resistance to wet abrasion (according to EN 13300) or a penetrating primer.
Application
Tint VAX MATT to the selected color. Mix until uniform before use. During application and drying, the temperature of the air, material and base must be from +10 °C to +25 °C. Avoid drafts during application.
Apply VAX MATT in 1-2 layers. To finish large surfaces, mix VAX MATT from several containers together in one container in the required quantity. Work on one plane should be carried out without interruption, from corner to corner of the room or within relief elements. It is recommended to treat a surface area of 1-2 m² at a time. Apply VAX MATT to the surface with a brush, roller, sponge or special glove, and if necessary, immediately distribute it “wet” over the surface with a silicone or rubber spatula or sponge. The open time of working with VAX MATT depends on the absorbency of the base, as well as on the thickness of the layer and is up to 5 minutes. When joining the next treated area, the edge of the previously treated surface should still be wet. On large surfaces, it is recommended to work in pairs: one painter applies a solid layer of material, and the second behind him distributes the material over the surface with a special tool. For a deeper wood effect, it is recommended to apply two layers of VAX MATT. The second layer should be applied after the first one has dried.
VAX MATT can be applied using different techniques to achieve different effects. The procedure for applying VAX MATT to mineral structured surfaces with the effects of "travertine", "marmorino", "grotto", as well as other types of structured surfaces can be found on the website www.eskaro.com.
Caring for the painted surface
VAX MATT reaches its final wear resistance after 3 weeks. Avoid cleaning the surface during this period, but if the surface still needs to be cleaned, do so carefully using a damp cloth. In the future, it is recommended to remove dirt from the surface immediately after it appears. For cleaning, use a soft cloth and warm water with a neutral or medium alkaline (pH up to 9) detergent. Do not use solvents, abrasive detergents, hard sponges and brushes. After damp cleaning, wipe the surface dry.
Synthetic waxes, copolymer acrylic dispersion, functional additives, water. UA VOC limit value for this product (Cat. A/l): 200 g/l (g/l). This product contains max 200 g/l (g/l) VOC.
Precautions
During work, follow general rules of occupational hygiene. Work in a ventilated area, wear work clothes, gloves. Keep out of reach of children. In case of contact with eyes, rinse with water. The product is fire and explosion-proof.
Disposal
Dispose of dried product and empty container as household waste.
1 kg – 2.5 kg