Aura
Triumf 90
- Water-based glossy.
- Scratch-resistant.
- Strong and elastic film.
- Protection against dirt and moisture.
Download data sheet 
Properties Acrylic varnish for furniture. - Acrylic water-based varnish. - Odorless. - Dries quickly and becomes hard. - Forms a glossy, transparent, elastic and durable film. - Has no residual stickiness. - Withstands mechanical and operational loads well. - Resistant to scratches and abrasion. - Does not change the color of the wood. - Protects the surface from moisture and household dirt. - Forms a coating resistant to washing with household products. - Tinted using the Eskarocolor system. Attention! The coating gains final strength 2 weeks after applying the varnish. If dyes and fatty substances, as well as liquids containing alcohol, get on the varnished surface, it is necessary to clean the surface immediately. Do not use abrasive detergents, hard brushes and sponges, or solvents to clean the surface. Intended use For varnishing new and previously painted wooden furniture indoors. Recommended for varnishing ceilings and walls decorated with wood, and other interior elements. Well suited for creativity and "hand-made" design solutions. Can be used during interior work to decorate mineral surfaces. The varnish is not intended for steam rooms and floors. Types of surfaces for application Objects: chairs, tables, shelves, cabinets, shelves, etc. Protective varnishing of stained and painted surfaces. Interior elements: doors, window frames, skirting boards, etc. Mineral surfaces in the interior: concrete, brick, plastered, stone, etc.
EC base - rich tones
CLASSIFICATION ACCORDING TO THE DSTU STANDARD EN 13300:2024
Decoration and special properties. Binder type: copolymer acrylic resin. Glossy. Wet abrasion resistance: Class 1.
Surface preparation
The surface must be clean of dirt, dust, old coatings that are peeling,
degreased, dry, strong. Wood moisture <18%. Prime new wood with Biogrund Aqua penetrating primer or Triumf varnish diluted 15% with water, and after drying, sand with sandpaper, remove dust. Previously painted with paint (varnish), as well as smooth surfaces, treat with sandpaper until matte, remove dust. Prime mineral bases with high absorption capacity with TM AURA penetrating primer or TM Eskaro Aquastop.
Application
Stir. Do not thin. Stir the tinted varnish periodically during application. Apply in 2-3 layers at air, base, varnish temperature from +10 ºС to +30 ºС and relative air humidity <80%. It is recommended to sand the surface between coats with sandpaper (grain "320"). Apply varnish to wood along the wood fibers from edge to edge of the surface. The color of the surface covered with tinted varnish and the final decorative effect (including different shades on the surface) depend on the type of wood and its absorbency, preparation and natural color of the wood, application method, number of applied layers. Applying varnish in direct sunlight, drafts, and high temperatures can lead to coating defects.
Publication: Paint wood with tinted varnish correctly!
Working tools
Brush, varnish roller, spray gun.
Cleaning tools
After use, rinse with water. Dried varnish is cleaned mechanically.
Copolymer acrylic dispersion, wax, additives, water. UA VOC limit value for this product (Cat. A/e): 130 g/l (g/l). This product contains max 130 g/l (g/l) VOC.
Precautions
During work, follow general rules of occupational hygiene. Work in a ventilated area, in work clothes, gloves. Keep out of reach of children. In case of contact with eyes, rinse with water. The varnish is fire and explosion-proof.
Disposal
Residues of dried varnish and polymer containers should be disposed of as household waste.
0.75 L (0.76 kg) - 2.5 L (2.55 kg)