Download data sheet 
Properties Acrylic decorative enamel. - Forms a durable glossy coating with excellent decorative characteristics. - Has high whiteness, good wear resistance and elasticity. - Does not crack or turn yellow, withstands temperature and humidity changes. - Has no residual stickiness. - Dries quickly. - Has good adhesion to various types of surfaces, including old alkyd ones. - The coating acquires its final resistance to washing after 4 weeks. - Does not have an unpleasant odor. Classification according to the standard DSTU EN 13300:2024 - Decoration. - Type of binder: acrylic resin. - Glossy. Fine-grained. - Resistance to wet abrasion: class 1. - Contrast ratio: class 3. Surface coverage rate with material: 6-10 m²/l per single-layer coating. Intended use For decorative and protective painting of wooden and mineral, as well as primed metal surfaces. Not suitable for painting floors. Types of surfaces for painting Inside dry and damp rooms: New or previously painted (with water-dispersion, alkyd, oil-phthalate paints) surfaces: wooden (window frames, doors, skirting boards, decorative elements, lining, cladding boards, chipboard, fiberboard, etc.), mineral (putty, plaster, concrete bases, etc.), plasterboard, wallpaper for painting. Primed or previously painted (with water-based enamels, alkyd and oil-phthalate paints) metal surfaces. Suitable for painting window slopes, as well as primed or previously painted radiators and heating system elements. Outside: Wooden, mineral, primed metal surfaces.
Base A - pastel colors
• Class 1 wear resistance according to DIN EN 13300.
• VOC (volatile organic compounds) content complies with European Union Directive 2004/42/CE. 2004/42/EC.
Surface preparation before painting
The surface must be free of flaking paint, dirt and dust, rust, degreased, dry. Prime metal surfaces with a suitable primer. Surfaces previously painted with oil or alkyd paint, as well as shiny surfaces, should be sanded to a matte finish. If necessary, fill and prime surface irregularities with suitable materials. Prime new wood with a suitable primer and sand with sandpaper. Prime mineral surfaces and gypsum plasterboard with a suitable primer.
Application
Stir the enamel before use. Apply with a brush, roller or sprayer (including airless method) in 2 layers. If necessary, for applying the first (priming) layer, the enamel can be diluted with water no more than 5% by volume. Work should be carried out at ambient and base temperatures from +10°C to +25°C and relative humidity not higher than 80%. Apply the second coat of enamel no earlier than 5 hours after applying the first. Do not apply enamel in direct sunlight, during fog, or wind. Attention! The coating gains its final strength 4 weeks after applying the enamel. The coating acquires its final color after the enamel dries.
Working tools
Brush, roller, spray gun.
Cleaning tools
Rinse with water immediately after use. Dried enamel is cleaned mechanically.
Polymer acrylic dispersion, wax, pigments, special fillers, water, additives. UA VOC limit value for this product (cat. A/b) 100 g/l (g/l). This product contains max 100 g/l (g/l) VOC.
Apply the second layer of enamel only after the first one has completely dried.
Precautions
During work, follow general occupational hygiene rules. Work in a ventilated area, wear work clothes, gloves. Keep out of reach of children. In case of contact with eyes, rinse with water. Enamel is fire and explosion-proof.
Disposal
Remains of dried enamel should be disposed of as household waste, polymer containers should be collected for recycling or disposed of as household waste.
0.75 L (0.89 kg), 2.5 L (2.95 kg)