Aura
Luxpro K&B
- Gloss – “10”
- Especially resistant to washing
- Contains anti-mold additives and wax
Download data sheet 
Properties Acrylate semi-matt (gloss "10") paint with high decorative characteristics. - Particularly resistant to washing, including using detergents and disinfectants. - Contains anti-mold additives that inhibit the development of microorganisms (mold and fungi) on the surface of the paint film. - The anti-mold qualities of the paint according to the European standard EN 15457 are confirmed by research by the Troy Technical Center Europe laboratory (Germany). - Has high adhesion and is easily distributed over the surface, ensuring low consumption while maintaining high coverage. - Forms a smooth surface with a semi-matt gloss (gloss "10"). - Thin-layer. - Suitable for painting structural surfaces, as well as wallpapers of various types. - Forms a particularly durable coating, resistant to repeated washing (1st class of resistance to wet rubbing according to DIN EN 13300). - The wax additives contained contribute to easy removal of dirt. - The coating acquires its final resistance to washing in 3–4 weeks. - Vapor permeable. - The VOC content (volatile organic compounds) complies with the European Union Directive 2004/42/EC. - Guarantee of high quality of finishing works. Purpose Acrylic semi-matt paint with high decorative characteristics. For ceilings and walls in rooms with high humidity and high operational requirements, as well as where frequent wet cleaning is required, including the use of detergents and disinfectants: bathrooms, kitchens, corridors, living rooms, foyers, public areas, stairwells, residential and office premises. Types of surfaces for application It is used on new or previously painted surfaces with water-dispersion or alkyd paints: concrete, aerated concrete, silicate brick, putty or plastered surfaces, fiberboard and chipboard, as well as plasterboard. Excellent for painting structural surfaces, as well as embossed, embossed and fiberglass wallpapers.
Base A - pastel colors
CLASSIFICATION ACCORDING TO THE STANDARD DSTU EN 13300:2012.
- Decoration.
- Binder type: copolymer acrylic resin.
- Matt.
- Fine-grained.
- Resistance to wet abrasion: class 1.
- Contrast coefficient class 3. Surface coverage rate with material: 7–12 m²/l per single-layer coating.
Surface preparation before painting
Unpainted surfaces. Clean the surface of loose and flaking material, dirt and dust. Completely remove chalk and lime whitewash. Level unevenness, cracks and potholes with acrylic putty. Surfaces prone to mold formation should be treated with Biotol (or Biotol spray) before painting. Prime unevenly absorbing surfaces with TM Eskaro or TM AURA water-dispersion primer. In dry rooms, AURA Luxpro 3 paint can be used for the first coat.
Painted surfaces. Clean the surface of loose and flaking paint, dirt and dust. If necessary, degrease the surface with a 3–5% solution of baking soda, rinse with water and dry. Level unevenness, cracks and potholes with acrylic putty. Previously painted surfaces with alkyd paint or enamel should be cleaned of any flaking coating, treated with sandpaper until rough and cleaned of any dust that has formed. Unevenly absorbent surfaces should be primed with TM Eskaro or TM AURA water-dispersion primer.
Application
Stir the paint before use. Apply with a roller, brush or spray gun (including airless method) in 1–2 layers. For high-pressure spraying, use a 0.017–0.021" nozzle. If necessary, for applying the first layer (for priming), the paint can be diluted with water no more than 10% by volume. Work should be carried out at ambient and base temperatures from +5ºС to +30ºС. The second layer of paint should be applied no earlier than 2 hours after applying the first.
Attention! The coating acquires its final color after the paint dries.
Working tools
Brush, roller, spray gun.
Cleaning tools
Rinse with water immediately after use. Dried paint can be cleaned mechanically.
Copolymer acrylic dispersion, pigments, fillers, water, additives. UA VOC limit value for this product (cat. A/1): 30 g/l. This product contains max 30 g/l VOC.
Precautions
During work, follow general occupational hygiene rules. Work in a ventilated area, wear work clothes, gloves. Keep out of reach of children. In case of contact with eyes, rinse with water. The paint is fire and explosion-proof.
Disposal
Remains of dried paint should be disposed of as household waste, polymer containers should be collected for recycling or disposed of as household waste.
1 liter (1.22 kg); 2.5 l (3.05 kg); 5 l (6.1 kg); 10 l (12.2 kg)