Aura
Aura Luxpro 1
Paint for walls and ceilings
- Absolutely matte
- Acrylic
- Highest class of washability and wear resistance (class 1)
- Easy to roll
- Breathable surface
Download data sheet 
Properties Absolutely matt paint is particularly resistant to washing. - Acrylate deep matt (gloss 2) paint. - Has high adhesion and is easily distributed over the surface, ensuring low consumption while maintaining high coverage. - Forms a smooth surface with a pleasant velvety sheen. - Thin-layered. - Suitable for painting structural surfaces and wallpapers of various types. - Forms a coating resistant to repeated washing (class 1 resistance to wet rubbing according to DIN EN 13300). - Contains additives that facilitate easy removal of dirt. - The coating acquires its final resistance to washing after 3–4 weeks. - Vapor-permeable. - Solvent-free. - Tintable according to the Eskarocolor system in pastel and saturated colors. - For interior work. Purpose Absolutely matt acrylate paint is particularly resistant to washing. For ceilings and walls in rooms with normal humidity and high operational requirements, as well as where repeated wet cleaning is required: residential and office premises, kitchens, corridors, lobbies, public areas, stairwells, etc. Types of surfaces for painting It is used on new or previously painted with water-dispersion or alkyd paints: concrete, aerated concrete, silicate brick, putty or plastered surfaces, fiberboard and chipboard, as well as plasterboard. Excellent for painting structural surfaces, as well as embossed, embossed and fiberglass wallpapers.
Base A - pastel colors
TR base - rich tones
CLASSIFICATION ACCORDING TO THE STANDARD DSTU EN 13300:2024.
- Decoration.
- Binder type: copolymer acrylic resin.
- Deep-etched.
- Fine-grained.
- Resistance to wet abrasion: class 1.
- Contrast coefficient (for base A - white): class 2. Surface coverage rate with material: 7–12 m²/l per single-layer coating.
Surface preparation before painting
Unpainted surfaces. Clean the surface from loose, flaking material, dirt and dust. Chalk and lime whitewash should be completely removed. Level out unevenness, cracks and potholes with acrylic putty. Surfaces that are frequently wetted and prone to mold should be treated with Biotol (or Biotol Spray) before painting. Unevenly absorbent surfaces should be primed with water-dispersion primer TM Eskaro or TM AURA. In rooms with low operational load, AURA Luxpro 3 paint can be used for applying the first layer.
Painted surfaces. Clean the surface from loose, peeling paint, dirt and dust. If necessary, degrease the surface with a 3–5% solution of baking soda, rinse with water and dry. Smooth out unevenness, cracks and potholes with acrylic putty. Clean surfaces previously painted with alkyd (oil) paint or enamel from peeling coating, roughen with sandpaper and clean from dust. Prime unevenly absorbing surfaces with water-dispersion primer TM Eskaro or TM AURA.
Application
Stir the paint before use. Apply with a roller, brush or spray gun (including airless method) in 1–2 layers. For high-pressure spraying, use a 0.017" - 0.021" nozzle. If necessary, for applying the first (primer) layer, the paint can be diluted with water by no more than 10% by volume. Work should be carried out at ambient and base temperatures from +5ºС to +30ºС. The second layer of paint should be applied no earlier than 2 hours after applying the first.
Using the TR base: use the TR base (colorless) paint only in a tinted form (according to the Eskarocolor system). Before applying the TR base, paint the surface in 1 layer with AURA Luxpro 1 base A (white) paint, which is tinted in a lighter shade of the color of the finishing coating. Do not dilute the tinted TR paint base, apply 2 to 4 (for rich red and yellow colors, light green colors) layers. The number of layers depends on the color of the paint.
For painting large areas with tinted paint, it is recommended to use paint from one production batch. If you have tinted paint from different production batches, it is recommended to mix them in one container in advance.
Attention! The coating takes on its final color after the paint dries.
Working tools
Brush, roller, spray gun.
Cleaning tools
Rinse with water immediately after use. Dried paint is cleaned mechanically.
Copolymer acrylic dispersion, opalescent polymers, pigments (for base A), fillers, water, additives. UA VOC limit value for this product (cat. A/a): 30 g/l (g/l). This product contains max 30 g/l (g/l) VOC.
Precautions
During work, follow general occupational hygiene rules. Work in a ventilated area, wear work clothes, gloves. Keep out of reach of children. In case of contact with eyes, rinse with water. The paint is fire and explosion-proof.
Disposal
Remains of dried paint should be disposed of as household waste, polymer containers should be collected for recycling or disposed of as household waste.
Base A: 0.95 l (1.33 kg); 2.85 l (4 kg); 4.75 l (6.65 kg); 9.5 L (13.3 kg) Base TR: 0.9 L (1.13 kg); 2.25 l (2.8 kg); 9 l (11.25 kg)