Aura
Aura Luxpro 10
Paint for kitchens and bathrooms
- Semi-matte. Gloss – “10”
- Especially resistant to washing (class 1)
- Contains wax and anti-mold additives
Download data sheet 
Properties Acrylate semi-matt (gloss "10") paint with high decorative characteristics. - Particularly resistant to washing, including using detergents and disinfectants. - Contains anti-mold additives that inhibit the development of microorganisms (mold and fungi) on the surface of the paint film. - The anti-mold qualities of the paint according to the European standard EN 15457 are confirmed by research by the Troy Technical Center Europe laboratory (Germany). - Has high adhesion and is easily distributed over the surface, ensuring low consumption while maintaining high coverage. - Forms a smooth surface with a semi-matt gloss (gloss "10"). - Thin-layer. - Suitable for painting structural surfaces, as well as wallpapers of various types. - Forms a particularly durable coating, resistant to repeated washing (1st class of resistance to wet rubbing according to DIN EN 13300). - The wax additives contained contribute to easy removal of dirt. - The coating acquires its final resistance to washing in 3–4 weeks. - Vapor permeable. - The VOC content (volatile organic compounds) complies with the European Union Directive 2004/42/EC. - Guarantee of high quality of finishing works. Purpose Acrylic semi-matt paint with high decorative characteristics. For ceilings and walls in rooms with high humidity and high operational requirements, as well as where frequent wet cleaning is required, including the use of detergents and disinfectants: bathrooms, kitchens, corridors, living rooms, foyers, public areas, stairwells, residential and office premises. Types of surfaces for painting It is used on new or previously painted surfaces with water-dispersion or alkyd paints: concrete, aerated concrete, silicate brick, putty or plastered surfaces, fiberboard and chipboard, as well as plasterboard. Excellent for painting structural surfaces, as well as embossed, embossed and fiberglass wallpapers.
Base A - pastel colors
CLASSIFICATION ACCORDING TO THE DSTU STANDARD EN 13300:2024.
- Decoration.
- Binder type: copolymer acrylic resin.
- Matt.
- Fine-grained.
- Resistance to wet abrasion: class 1.
- Contrast ratio class 3. Surface coverage rate: 7–12 m²/l per single coat.
Surface preparation before painting
Unpainted surfaces. Clean the surface of loose and flaking material, dirt and dust. Completely remove chalk and lime whitewash. Level out unevenness, cracks and potholes with acrylic putty. Surfaces prone to mold formation should be treated with Biotol (or Biotol spray) before painting. Unevenly absorbent surfaces should be primed with TM Eskaro or TM AURA water-dispersion primer. In dry rooms, AURA Luxpro 3 paint can be used for the first coat.
Painted surfaces. Clean the surface of loose and peeling paint, dirt and dust. If necessary, degrease the surface with a 3–5% solution of baking soda, rinse with water and dry. Smooth out unevenness, cracks and potholes with acrylic putty. Surfaces previously painted with alkyd paint or enamel should be cleaned of peeling coating, treated with sandpaper until rough and cleaned of dust that has formed. Unevenly absorbing surfaces should be primed with water-dispersion primer TM Eskaro or TM AURA.
Applying
Mix the paint before use. Apply with a roller, brush or spray gun (including airless method) in 1–2 layers. For high-pressure spraying, use a 0.017–0.021" nozzle. If necessary, for applying the first layer (for priming), the paint can be diluted with water no more than 10% by volume. Work should be carried out at ambient and base temperatures from +5ºС to +30ºС. The second layer of paint should be applied no earlier than 2 hours after applying the first.
Attention! The coating takes on its final color after the paint dries.
Working tools
Brush, roller, spray gun.
Cleaning tools
Rinse with water immediately after use. Dried paint is cleaned mechanically.
Copolymer acrylic dispersion, pigments, fillers, water, additives. UA VOC limit value for this product (Cat. A/a): 30 g/l. This product contains max 30 g/l VOC.
Precautions
During work, follow general occupational hygiene rules. Work in a ventilated area, wear work clothes, gloves. Keep out of reach of children. In case of contact with eyes, rinse with water. The paint is fire and explosion-proof.
Disposal
Remains of dried paint should be disposed of as household waste, polymer containers should be collected for recycling or disposed of as household waste.
0.95 l (1.22 kg); 2.85 l (3.65 kg); 4.75 l (6.08 kg); 9.5 L (12.16 kg)