Condor Aqua Lack 70

Interior acrylic varnish

Water-based glossy.
Protect the surface from contamination and moisture.
Transparent, elastic, durable membrane.
Without unpleasant smell.

Description
Specifications
Information
Certificates

Properties

Interior acrylic water-based varnish.

Protects the surface from contamination and moisture.
Prevents wood from yellowing.
Forms semi-matte transparent, resilient and durable membrane.
Does not change the color of the wood.
Has good adhesion to various types of surfaces.
Ideal for decorating of walls and ceilings painted with water-based paint.
Withstands repeated wet cleaning with neutral household detergents.
Without unpleasant smell.

Do not use abrasive detergents, as well as hard brushes and sponges.
Attention! The coating gets final strength after 4 weeks after varnish applied.

Purpose

Designed for finishing of mineral, wood, as well as previously painted or wallpaper pasted surfaces. Varnish is used to impart moisture and durability to surfaces. Varnish is designed for indoor use. Varnish is not suitable for steam rooms, floors and surfaces subject to strong mechanical wear.

Types of surfaces for drawing

Surfaces for painting: mineral surfaces (concrete, brick, plastered, stone, etc.), wooden surfaces (wall and ceiling panels, logs, bars, fibreboard, chipboard, etc.), and also the surfaces which were previously painted or covered with wallpaper.

Quality standards

1 class of wear resistance according to DIN EN 13300
VOC content (volatile organic compounds) complies with European Union Directive 2004/42 / EC.

Машинная колеровка

База ЕС saturated colours

… 39 shades!

Surface preparation

The surface should be cleaned from dirt and dust, degreased, dry, durable. The moisture content of wooden surfaces should not exceed 18%. It is recommended to prime the new wood with a suitable primer and sand it with sandpaper, remove the dust. Old, peeling coatings (varnish, paint, etc.) should be completely removed, surface treated with sandpaper, dust removed. Surfaces previously painted with oil or alkyd paint, alkyd varnish, as well as shiny surfaces are treated with sandpaper to a matte surface, and dust is removed. If necessary, surface irregularities should be sprinkled and primed with appropriate materials. Highly absorbent mineral bases should be primed with TM AURA or TM Eskaro Aquastop.

Painting

Before use, be sure to mix the varnish. To aaply with a brush, the roller, a spray in 2–3 layers. It is recommended to apply on wood along wood fibers from edge to edge of the surface. If it is necessary, for applying the first (primer) layer, the varnish can be diluted with water no more than 5% by volume. Work should be carried out at ambient air and base temperatures from + 5ºС to + 30ºС. When processing new wood after drying the first layer, sand the surface with fine sandpaper, remove dust. Apply the following varnish coat not earlier than in 2 hours after applying previous one. Applying lacquer in direct sunlight, draft and elevated temperature can cause coating defects. The color of the surface coated with tinted varnish depends on the number and thickness of the applied varnish layers, as well as on the color of the substrate (including hue and wood type). The last coat is recommended to be applied with uncoated varnish.

Tools

Brush, varnish roller, spray.

Cleaning tools

Immediately after use, rinse with water. Dried varnish is mechanically cleaned.

Composition

Acrylic copolymer dispersion, water, additives.

Colour	Colorless after drying. Machine tinting system Eskarocolor. Manual tinting dyes-paints TM Aura.
Tinting	Colorless after drying. Machine tinting system Eskarocolor. Manual tinting dyes-paints TM Aura.
Consumption	8-10 m² / l per coat. Varnish consumption depends on the type and surface preparation.
Drying time	30 minutes - from dust. The next layer can be applied after 2 hours at temperature of + 20°C and a relative humidity of 65%. At other temperatures and humidity, the drying time may vary.

Precautionary measures

Working follow the general rules of occupational health. Work in a ventilated area, in work clothes, gloves. Keep out of the reach of children. In case of contact with eyes, rinse with water. The varnish is fire and explosion proof.

Recycling

Remains of dried varnish and plastic containers should be disposed of as household waste.

Volume / weight

1 L (1.02 kg) - 2.5 L (2.55 kg) - 10 L (10.2 kg)

Warranty period of storage	2 years
Frost resistance	Do not freeze.
Density
Storage conditions	Store and transport in intact original packaging at temperatures from + 5ºС to + 35ºC. Protect from frost and direct sunlight.
	Array