Surface preparation
The surface should be cleaned from dirt and dust, degreased, dry, durable. The moisture content of wooden surfaces should not exceed 18%. It is recommended to prime the new wood with a suitable primer and sand it with sandpaper, remove the dust. Old, peeling coatings (varnish, paint, etc.) should be completely removed, surface treated with sandpaper, dust removed. Surfaces previously painted with oil or alkyd paint, alkyd varnish, as well as shiny surfaces are treated with sandpaper to a matte surface, and dust is removed. If necessary, surface irregularities should be sprinkled and primed with appropriate materials. Highly absorbent mineral bases should be primed with TM AURA or TM Eskaro Aquastop.
Painting
Before use, be sure to mix the varnish. To aaply with a brush, the roller, a spray in 2–3 layers. It is recommended to apply on wood along wood fibers from edge to edge of the surface. If it is necessary, for applying the first (primer) layer, the varnish can be diluted with water no more than 5% by volume. Work should be carried out at ambient air and base temperatures from + 5ºС to + 30ºС. When processing new wood after drying the first layer, sand the surface with fine sandpaper, remove dust. Apply the following varnish coat not earlier than in 2 hours after applying previous one. Applying lacquer in direct sunlight, draft and elevated temperature can cause coating defects. The color of the surface coated with tinted varnish depends on the number and thickness of the applied varnish layers, as well as on the color of the substrate (including hue and wood type). The last coat is recommended to be applied with uncoated varnish.
Tools
Brush, varnish roller, spray.
Cleaning tools
Immediately after use, rinse with water. Dried varnish is mechanically cleaned.
Composition
Acrylic copolymer dispersion, water, additives.