Preparation surface

Unpainted surface.
Unevenness leveling putty on wood. To grind a surface with a fine-grained emery cloth. Clean from dust, dirt and grease.
Previously painted surface.
Remove peeling paint with a scraper or remover. Unevenness leveling putty on wood. To grind the puttied areas with fine-grained emery cloth. The surface must be dry and free from dust.

Drawing

Before using the enamel must be thoroughly mixed. If necessary, dilute the enamel with white spirit, solvent (no more than 5% of the total enamel volume). To form a durable protective coating, it is recommended to apply the primer in 2 layers with intermediate drying between layers for at least 24 hours. Apply at a temperature of surface, enamel and air from + 5°C to + 35ºС, relative humidity less than 80%. Apply the next layer after the previous one is completely dry.

Working tools

Brush or roller.

Cleaning tools

Immediately after use, rinse with white spirit and then with warm water and cleanser. Dried enamel is mechanically cleaned.

Precautionary measures

Keep out of the reach of children. Avoid contact with eyes and skin. When carrying out painting works, as well as after their completion, it is necessary to ventilate the room thoroughly. Rubber gloves should be used to protect hands, and a respirator should be used to protect respiratory organs.
Keep away from fire!

Recycling

Do not pour into drains, reservoir or on the ground. Dispose of product residues and containers at organized waste collection sites.