Surface preparation
The surface must be cleaned of exfoliating paint, dirt and dust, rust, grease, dry. Prime metal surfaces with a suitable primer. Surfaces previously painted with oil or alkyd paint, as well as shiny surfaces, are treated with sand paper to a dull finish. If necessary, surface irregularities should be filled and primed with appropriate materials. Prime new wood with a suitable primer and sand it with sandpaper. Mineral surfaces and GCR should be primed with a suitable primer.
Application
Mix enamel before use. Apply by brush, roller in 2-3 layers, spray (including airless method) in 3-4 layers. For spray application, the paint can be diluted with water to a working viscosity. Work should be carried out at a temperature of enamel, ambient air and base from +10 ºС to +25 ºС and relative humidity of air no more than 80%. The second (subsequent) layer of enamel is applied no earlier than 5 hours after applying the previous one. Do not apply enamel in direct sunlight, during fog, wind.
Features application of the base TR: Enamel Remix Aqua 30 base TR (colorless) should be used only in a tinted (according to the Eskarocolor system) form. To increase hiding power and reduce consumption, it is recommended that before applying Remix Aqua 30 base TR, the surface be painted in 1 coat with Remix Aqua 30 base A enamel (white), which is tinted in a lighter shade of the color of the finish.
Attention! The coating gains its final strength 4 weeks after applying the enamel. The coating becomes final after the enamel has dried.
Tools
Brush, roller, sprayer.
Tool cleaning
Rinse immediately with water. The dried enamel is cleaned mechanically.
Composition
Acrylic polymer dispersion, pigment - titanium dioxide (for base A), wax, special fillers, water, additives.