Preparation surface

Wooden surfaces.
New surface must be sanded, remove dust and dirt. The surface must be primed with wood protection primer.
Previously painted surfaces must be cleaned from peeling paint layers and dirt. Grind, roughen the surface by sanding, remove dust and, if necessary, prime with wood protection primer.
Metal surfaces.
A new surface must be cleaned of dust, dirt and rust, degreased and primed with a suitable primer with anti-corrosion properties.
The previously painted surface should be cleaned from peeling paint layers, rust and scale.
Sand, remove dust and grease. If necessary, prime with a suitable primer with anti -corrosion
properties.

Drawing

Before use, the primer must be thoroughly mixed. In the presence of a surface film, it must
be removed. If necessary, dilute with white spirit or solvent. The degree of dilution - 5-15% of
the enamel weight and depends on the type of working tool. Apply at a temperature of
surface, enamel and air from + 5°C to + 35ºС, relative humidity less than 80%. It is not
recommended staining during rain and fog. For the formation of durable protective coating
the enamel is recommended to be applied in 2 layers. Before applying the next layer, make
sure that the previous layer is completely dry.

Working tools

Apply with brush, roller or spray.

Cleaning tools

Immediately after use, rinse with white spirit and then with warm water and cleanser. Dried
enamel is mechanically cleaned.

Precautionary measures

Keep out of the reach of children. Avoid contact with eyes and skin. When carrying out
painting works, as well as after their completion, it is necessary to ventilate the room
thoroughly. Rubber gloves should be used to protect hands, and a respirator should be used
when painting with a paint sprayer.
Keep away from fire!

Recycling

Do not pour into drains, reservoir or on the ground. Dispose of closed containers with
product residues at organized waste collection sites.